FAQ

FAQ

TAMBAYOYIN DA AKE YAWAN YIWA

Yaya ake amfani da injin?

Kuna sanya kayan aikin ku a ƙarƙashin maƙallan, kunna manne, sannan ku ja babban hannun (s) don lanƙwasa kayan aikin.

Yaya aka makala manne?

Ana amfani da shi, ana riƙe shi ta hanyar lantarki mai ƙarfi sosai.Ba a haɗe shi na dindindin ba, amma yana cikin daidai matsayinsa ta ƙwallon da aka ɗora a bazara a kowane ƙarshensa.
Wannan tsari yana ba ku damar ƙirƙirar sifofin rufaffiyar takarda, da kuma musanyawa zuwa wasu clampbars da sauri.

Menene iyakar kauri takardar da zai lanƙwasa?

Zai lanƙwasa takardar ƙarfe mai laushi 1.6 mm a cikin cikakken tsawon injin.Zai iya lanƙwasa kauri a cikin guntun tsayi.

Me game da aluminum da bakin karfe?

e, injin JDC na lankwasawa zai lanƙwasa su.Maganar maganadisu ta ratsa su kuma ya ja ƙasa da clampbar a kan takardar. Zai lanƙwasa 1.6 mm aluminum a tsawon tsayi, kuma 1.0 mm bakin karfe a tsawon tsayi.

Ta yaya kuke sanya shi manne?

Kuna danna kuma ka riƙe maɓallin "Fara" kore na ɗan lokaci.Wannan yana haifar da matsewar maganadisu haske.Lokacin da ka ja babban hannu zai juya ta atomatik zuwa cikakken karfin wuta.

Ta yaya a zahiri tanƙwara?

Kuna yin lanƙwasawa da hannu ta hanyar ja babban hannun (s).Wannan yana lanƙwasa ƙwanƙolin da ke kusa da gefen gaba na ƙugiya wanda aka riƙe a wurin magnetically.Madaidaicin ma'auni mai dacewa akan hannu yana gaya muku kusurwar katakon lanƙwasa a kowane lokaci.

Ta yaya kuke sakin kayan aikin?

Yayin da kake dawo da babban hannun magnet ɗin yana kashe ta atomatik, kuma clampbar yana tashi akan ƙwallan da aka ɗora a lokacin bazara, yana sakin kayan aikin.

Ba za a sami ragowar maganadisu a cikin aikin ba?

A duk lokacin da injin ya kashe, ana aika ɗan gajeren bugun bugun jini ta hanyar wutar lantarki don rage girmansa da kayan aikin.

Yaya za ku daidaita don kaurin karfe?

Ta hanyar canza masu daidaitawa a kowane ƙarshen babban matsi.Wannan yana canza lanƙwasawa tsakanin gaban ƙugiya da saman aiki na katakon lanƙwasawa lokacin da katako ya tashi a matsayi na 90°.

Ta yaya kuke yin birgima?

Ta amfani da na'ura mai lankwasawa na JDC don nannade takardar a hankali a kusa da tsayin bututun ƙarfe na yau da kullun ko mashaya zagaye.Domin injin yana aiki da maganadisu yana iya manne waɗannan abubuwa.

Shin yana da yatsu masu matsa birki?

Yana da saitin gajerun sassan clampbar waɗanda za a iya haɗa su tare don ƙirƙirar kwalaye.

Menene gano gajerun sassan?

Abubuwan da aka toshe tare dole ne su kasance suna kasancewa da hannu akan kayan aikin.Amma ba kamar sauran birkin kwanon rufi ba, gefen akwatunanku na iya zama tsayi mara iyaka.

Menene ramin ƙulli don?

Yana da don ƙirƙirar trays marasa zurfi da akwatunan ƙasa da zurfin 40 mm.Akwai shi azaman ƙarin zaɓi kuma yana da sauri don amfani fiye da daidaitattun sassan guntu.

Wane tsayin tire ne mai ramukan clampbar zai iya ninka?

Zai iya yin kowane tsayin tire a cikin tsayin maƙallan.Kowane nau'i-nau'i na nau'i-nau'i yana ba da bambancin girma fiye da 10 mm, kuma an yi amfani da matsayi na ramukan a hankali don samar da duk masu girma dabam.

Yaya ƙarfin maganadisu?

Wutar lantarki na iya matsawa da ton 1 na ƙarfi ga kowane tsayin 200 mm.Misali, 1250E yana manne har ton 6 akan cikakken tsayinsa.

Shin magnetism zai ƙare?

A'a, sabanin maganadisu na dindindin, electromagnet ba zai iya tsufa ko raunana ba saboda amfani.An yi shi da ƙarfe mai ƙyalƙyali mai ƙyalƙyali wanda ya dogara kawai da wutar lantarki a cikin nada don haɓakarsa.

Wadanne kayan masarufi ake bukata?

240 volt ac.Ƙananan ƙirar (har zuwa Model 1250E) suna gudana daga matsakaicin 10 Amp.Samfuran 2000E da sama suna buƙatar 15 Amp kanti.

Wadanne na'urorin haɗi sun zo daidai da na'urar lankwasawa na JDC?

Tsaya, madatsun baya, madaidaicin madauri mai tsayi, saitin gajerun sanduna, da jagorar duk ana kawo su.